Frame insert with 4 motors

Frame insert - four motors - stepless adjustment

The four-motor insert frame allows individual adjustment of the head section, upper body with lordosis bend to support the lumbar spine as well as the upper and lower legs by means of four independent motors. This allows you to lie or sit in bed in any conceivable position.

The motorised insert frame has a one-piece flat design and, in contrast to the classic insert frame, does not require a centre support in the bed frame. Nevertheless, we recommend a continuous side rail for more safety. It is placed loosely in the bed frame. No screwing is necessary. They are suitable for bed frames with cross-bracing.

The Hüsler Nest insert frames with motors are only suitable for the Liforma spring element. To prevent your Liforma spring element from slipping when you put it up or down, it is attached to the support bars with Velcro points.

The frame parts as well as the support spars are made of untreated solid wood for optimal breathability. The insert frames are free of closed metal circles. We have dispensed with any metal parts that are not absolutely necessary.

You can save two lying positions. This function is particularly suitable for people who need to raise their upper body for health reasons or who regularly want to spend a longer period of time sitting up in bed, for example to watch TV, read or have breakfast in bed. If there should ever be a power failure, manual emergency lowering is possible. When the hand-held radio transmitter is plugged into the base station, the mains cut-off protects against electromagnetic and electric alternating fields from the control box to the motors under the bed. The insert frames with motors fit into almost any existing bed frame. It is also possible to synchronise two motorised insert frames, so that at the push of a button the selected setting in a double bed is set on both insert frames at the same time.

Technical specifications

• Motor: 24 V DC, black
• Input voltage: 100-240 V, 50-60 Hz
• Battery: 2xAAA battery in radio hand-held transmitter / 2xAAA battery in control box
• IQ Power control: Equipped with 2 2-pole sockets, e.g. for bedside lamp (can also be disconnected from the mains) / With under-bed lighting via motion sensor

Material composition

Wood:

• Solid wood beech, aspen and alder

Glue:

• PVAc glue
• White glue
• Toxin class free

Drive:

• Strand plastic brown
• Metal parts reduced to the bare minimum

Care

• Remove the mains plug from the socket and wipe with a damp cloth.
• Never treat with wax or varnish, as this inhibits breathability.
• Replace batteries when necessary, but at least every two years.

Dimensions

• Installation height: 4 cm
• Height of frame with motor: 10.3 cm
• Minimum height: 6.3 cm from floor to top edge of support bar
• Weight: 31-51 kg

Available in the following widths and lengths:

• W 70 cm x L 190 cm / 200 cm / 210 cm / 220 cm
• W 80 cm x L 190 cm / 200 cm / 210 cm / 220 cm
• W 90 cm x L 190 cm / 200 cm / 210 cm / 220 cm
• W 95 cm x L 190 cm / 200 cm / 210 cm / 220 cm
• W 100 cm x L 190 cm / 200 cm / 210 cm / 220 cm
• W 120 cm x L 190 cm / 200 cm / 210 cm / 220 cm
• W 140 cm x L 190 cm / 200 cm / 210 cm / 220 cm

Special sizes are available on request.

Warranty

• 2 years